IMPORTANT INFORMATION
BEFORE YOU BEGIN:

If you have purchased your Fence Minder™ and energizer directly from Electrobraid Fence Limited or have informed us of the ElectroBraid™ Energizer's make and model you are using at the time of purchase, your Fence Minder™ has been configured for your specific energizer at the factory. If this is not the case or you connect a different energizer than the one you described to us, then you will have to see APPENDIX A: CHANGING DIP SWITCH SETTINGS, section A2.2 "SETTING THE ENERGIZER VOLTAGE COUNT AUTOMATICALLY" in order to configure your Fence Minder™ to work with another model energizer.

WARNING: The Fence Minder™ may not work with all makes and models of energizers on the market. We can only guarantee the Fence Minder's performance in use with ElectroBraid™ energizers.

Note: You should always have a siren connected to your Fence Minder™. Never rely solely on an auto-dialer in case of malfunction. Remember, if the phone line in your barn is the same phone line in your house, the auto-dialer will not be able to call your home as it will be occupying the same line.

The Fence Minder™ will not function if your fence is not wired correctly and operating properly. The Fence Minder™ does not replace the need to regularly test your fence as outlined in the ElectroBraid™ Fence Installation Manual.