Installing ElectroBraid™ Roller Insulators on Inside Corners:

The preferred method is to terminate the Braid™ at each Inside Corner and then re-connect the Braid™with copper lead-out wire. An alternative is to use use two ElectroBraid™ Rollers around the back of the post, as shown in the diagram.

Using Trees For Corner, End and Line Posts:
If you are running ElectroBraid™ through a mature wooded area, you may want to use standing trees for posts. A mature tree can provide an excellent brace. Ensure that you leave at least 1 foot space between the insulator and the tree trunk to prevent the roller from wearing the Braid™ as a result of the tree swaying back and forth in the wind.

NOTE: Remove any brush that may come in contact with the fence.

Warning: Avoid small trees that can move in the breeze and wear the Braid™.

Call us Toll Free: 1-888-430-3330