Tension Kit Assembly

Tensioning ElectroBraid™

After a strand of Braid™ is installed you can apply the ElectroBraid™ tensioning device.

Pull as hard as you can. Do not tension the Braid™ with a tractor, come-along or other mechanical device. The ratchet can handle 250 lbs. before it will slip, so do not worry about over tensioning when tightening the Braid™ by hand. The single strand breaking strength of ElectroBraid™ is over 1300 pounds. When you can’t pull anymore, loosen the copper split bolt connector, pull out the slack you have created and re-tighten the split bolt connector.

Call us Toll Free: 1-888-430-3330