Line Post Insulators for Line Posts:

1. Count the number of Line posts and multiply by the number of strands=____. This is the number of Line Post Insulators you will need for line posts.

Depending on the type of line posts you plan to use, these may be the same or a different insulator you plan to order for your Brace Posts (see above).

Insulated Copper Lead-Out Wire:

1. Add the widths of all your gates together and multiply by the number of strands =____+ (6' x number of strands) = ____.

2. Measure the distance from your Energizer to the nearest point on the fence = ____.

3. Measure the distance from your energizer to where your ground rods will be located = ____.

4. Add these numbers together = ____+ 20' for the distance between ground rods = ____. This is the length of lead-out wire you will need.

Consider buying extra wire for possible additional ground rods and/or changes in your fence design.

Copper Split-Bolt Connectors:

1. Count the number of End posts and multiply by the number of strands = ____.

2. Count the number of fence lines that exceed 1200' (the reel size you purchased), multiply by the number of strands and multiply by two = ____.

3. Add one Split-Bolt for each electrical connection.

4. Add these two numbers together = ____. This is the number of Split-Bolts you need.

Call us Toll Free: 1-888-430-3330