Energizer:
Select a suitable Energizer from the chart in this manual or call us to discuss.

Ground Rods:
You will require at least 3 ground rods and probably more if your fields are large or your soil conditions are poor.

Tensioning Kit:
You will need at least one and possible two ElectroBraid™ Tensioning Kits to tighten the Braid™.

More Information:
ElectroBraid™ and our dealers are here to help.

For more information on different fencing configurations, special considerations of combination fence designs, please contact us at:

www.electrobraid.com
Call 1-888-430-3330 or e-mail info@electrobraid.com

Tools Required

To install your ElectroBraid™ Fence you need the following tools...

ElectroBraid™Tensioning Kit	Hammer
Handheld Post Pounder*	Spade or Shovel
Black Electrical Tape	Measuring Tape
Utility Knife or wire cutters	Cigarette Lighter
Two Ratchet Handles with Sockets	Broom Handle (for unwinding Braid™)
Adjustable wrench	Safety Glasses
Spirit level

*For Ground Rods, T-Posts and Geotek's Fiberglass In-Line Posts you will have to purchase a post pounder from your local agricultural supply store.

Note: The Geotek Mule corner, end and dip posts require a Mule Anchor Install Tool.

A Better Way to Fence Your Horse